Instructions

Posted by Unknown on 25th Sep 2024

Strangely, there are no instructions for how to put them on your old mask.

First, use fabric glue all over the front portion. But, when you do this, only glue one area at a time. Hold it together until it dries and then move onto the next area. If you don't do this, you'll end up with gaps between this bib and the mask bib since you can't hold the two together everywhere at the same time.

After you glue them, you should sew the edges. Apparently, the glue will eventually fail.

You should use a thimble and a hooked needle. The thimble is required because the mask bib is very thick. You need a hooked needle because you need to sew the new bib to the outside surface to the mask bib. Don't penetrate the entire mask bib with the needle because it's unnecessary.